Hear from Our Customers
You stop worrying about warped boards every time humidity spikes. You stop second-guessing whether your contractor used the right underlayment for a coastal home. You get floors that look the way you wanted and hold up the way they should.
Most flooring failures in West Sayville aren’t about the material. They’re about installation that didn’t account for salt air, moisture from the ground, or temperature swings between seasons. When your subfloor prep is done right and your moisture barriers actually work, your floors stay flat, your seams stay tight, and you’re not calling someone back in two years.
Hardwood, luxury vinyl plank, laminate, tile—whatever you’re putting down needs to be installed by someone who knows what Suffolk County basements and crawl spaces do to flooring. That’s the difference between a floor that lasts and one that doesn’t.
Jaguar Renovations has been handling interior renovations across Suffolk County since 2016. We’re licensed, insured, and we don’t subcontract your job to someone you’ve never met. When you hire us for flooring, you’re working with the same crew from start to finish.
We’ve installed floors in West Sayville homes with crawl spaces that stay damp year-round, in basements that flood during heavy rain, and in kitchens where the original subfloor was never meant to support tile. We know what works here because we’ve seen what doesn’t.
You won’t get a high-pressure sales pitch. You’ll get a walkthrough, an honest assessment, and a clear price. If your subfloor needs work, we’ll tell you before we start. If your material choice won’t hold up in your space, we’ll say that too.
First, we come out to look at your space. We check your subfloor, measure for square footage, talk about what you’re trying to accomplish, and go over material options that actually make sense for your home. If there’s moisture, unlevel areas, or old adhesive that needs to come up, we’ll walk you through what that means for timeline and cost.
Once you’re ready to move forward, we schedule the work and give you a clear start date. We pull up your old flooring if needed, prep and level the subfloor, install moisture barriers where necessary, and then lay your new floor. For hardwood and laminate, that includes proper acclimation time. For tile, it means the right underlayment and grout for wet areas. For vinyl plank, it means seams that won’t lift and edges that won’t curl.
We clean up daily and we’re reachable if something comes up. When the job’s done, we walk the space with you to make sure everything looks right. You’re not chasing us down for fixes after we leave.
Ready to get started?
We install hardwood, engineered hardwood, luxury vinyl plank, laminate, ceramic tile, porcelain tile, and carpet. Each one has a place depending on your space, your subfloor, and how much moisture you’re dealing with.
Vinyl flooring is the most common request we get in West Sayville right now, especially for basements, bathrooms, and kitchens. It’s waterproof, it handles humidity better than laminate, and the quality of luxury vinyl plank has improved enough that it doesn’t look like a compromise anymore. Wide plank styles in light oak tones are popular because they make smaller rooms feel bigger and brighter.
Hardwood still works in living rooms, bedrooms, and main floors if your subfloor is dry and stable. Engineered hardwood is a better choice than solid if you’re near grade level or over a crawl space. Tile flooring works well in entryways and bathrooms where water exposure is constant, but it requires proper underlayment and waterproofing, especially in older homes where the subfloor wasn’t built for tile weight.
If you’re replacing flooring in your house and you’re not sure what to go with, we’ll talk through what makes sense for your space during the walkthrough. There’s no one-size-fits-all answer, and anyone who tells you there is hasn’t done enough floors in Suffolk County.
Luxury vinyl plank is the most reliable option if moisture is a concern. It’s fully waterproof, doesn’t expand or contract with humidity changes, and it’s durable enough for high-traffic areas. Engineered hardwood works too if your subfloor is dry and you’re not installing below grade.
Solid hardwood can work in main living areas, but it’s not a good choice for basements, bathrooms, or spaces near grade level where moisture comes up through the slab. Laminate flooring looks similar to hardwood but it’s not waterproof—if water gets into the seams, the planks swell and you’re replacing sections.
Tile is waterproof and handles humidity well, but it’s cold underfoot and requires a solid, level subfloor. If you’re set on the look of hardwood but need something that won’t warp, vinyl plank in a wood-look finish is the better call for coastal homes.
For a typical room around 200-300 square feet, you’re looking at $1,500 to $4,500 depending on material and subfloor condition. Vinyl plank installation usually runs less than hardwood or tile because the prep work is simpler and the material costs less per square foot.
If your subfloor needs leveling, moisture barrier installation, or if we’re pulling up old tile or glued-down carpet, that adds to the cost. We’ll tell you what’s needed during the walkthrough so there’s no surprise when you get the estimate.
Whole-house flooring projects obviously cost more, but the per-square-foot price usually drops as the project size goes up. The biggest variable is always subfloor prep—if your floor is level and dry, installation goes faster and costs less. If it’s not, we fix it first so your new floor doesn’t fail in a year.
A single room typically takes one to two days depending on the material. Vinyl plank and laminate go down faster than tile or hardwood because there’s no grout time or finish work. If we’re doing multiple rooms or a whole floor, plan on three to five days for most homes.
Subfloor prep adds time. If we need to level the floor, pull up old adhesive, or install new underlayment, that’s usually an extra day. Hardwood installation takes longer if we’re sanding and finishing on-site, but most of what we install now is prefinished, which cuts down the timeline and eliminates the smell and dust of on-site finishing.
We’ll give you a clear timeline before we start. If something comes up that changes the schedule, we’ll let you know the same day. You’re not going to be left guessing when your floors will be done.
Yes. We need the room completely empty before we start. That means furniture, rugs, floor lamps, anything sitting on the floor needs to be out of the space. If you need help moving heavy furniture, let us know when we schedule the job and we can work that into the plan.
We can work around appliances in kitchens if they’re staying in place, but if you’re replacing flooring under the fridge or stove, those need to be pulled out. Same with washers and dryers in laundry rooms.
Clearing the space ahead of time keeps the job moving and keeps costs down. If we show up and the room isn’t ready, we’re either delayed or we’re moving stuff for you, and that’s time that could’ve gone toward installation. The clearer the space, the faster we’re done.
It depends on what’s down now and what you’re putting on top. Vinyl plank and laminate can sometimes go over existing vinyl or tile if the surface is smooth, level, and well-adhered. If the old floor is loose, uneven, or damaged, it needs to come up first.
Hardwood and tile almost always require removing the old floor. Tile adds too much height and weight to go over most existing floors, and hardwood needs a clean, stable subfloor to avoid squeaks and movement. Carpet always comes up—there’s no scenario where we install over carpet.
We’ll check your existing floor during the walkthrough and let you know whether it stays or goes. If it needs to come up, we handle the demo and disposal. You don’t have to worry about hauling old flooring to the dump.
Make sure they’re licensed and insured. If they’re not, you’re on the hook if something goes wrong, and your homeowner’s insurance won’t cover damage caused by unlicensed work. Ask if they’re doing the work themselves or subcontracting it out. If it’s subcontracted, you’re adding another layer of communication and accountability issues.
Ask how they handle subfloor prep and moisture. If they’re not checking for level or talking about underlayment and vapor barriers, they’re skipping steps that matter in Suffolk County homes. Coastal humidity isn’t optional to plan for—it’s the reason half of all flooring failures happen here.
Get a written estimate that breaks out material, labor, and prep work separately. If the price seems too low, it probably means they’re cutting corners on prep or using lower-grade materials. You want someone who’s clear about what’s included, what’s extra, and what happens if they find issues once they start.
Local Resources
Useful Links
