Hear from Our Customers
You’re looking at walls with visible seams, popped nails, or rough patches that show through every coat of paint. Maybe you’re planning a renovation and need someone who can handle the drywall work without the runaround. Either way, you want it done right—not redone in six months.
That’s where proper sheetrock installation makes the difference. When the boards are hung level, the seams are taped clean, and the finish coat is smooth, your paint goes on easier and looks better. No shadows. No bumps. No callbacks.
You get walls that are ready for whatever finish you choose. And you’re not dealing with a crew that disappears halfway through or adds mystery charges at the end. Just clean work, clear communication, and a finished space that actually matches what you were promised.
We’ve been handling interior renovations across Selden and Suffolk County for almost ten years. That means we’ve seen what happens when corners get cut—and we’ve built our reputation by doing the opposite.
Every project gets the same approach: licensed and insured work, transparent pricing from the start, and direct communication with the people actually doing the job. No subcontractors. No hidden fees. No pressure to upsell you on things you don’t need.
Selden’s housing stock includes plenty of homes from the 1960s and 70s that need updates. We understand local building codes, permit requirements, and what it takes to bring older homes up to current standards. When you’re ready to move forward, you’re working with people who’ve done this hundreds of times in your area.
First, we assess the space. That means looking at existing walls, measuring the area, checking for any structural issues, and giving you a clear estimate with no surprises attached. You’ll know what the job costs before we start.
Next comes prep work. We protect your floors and furniture, remove old drywall if needed, and make sure the framing is solid and ready for new sheetrock. If there are electrical or plumbing considerations, we address those before hanging a single board.
Then we install. Boards go up level and secure, with proper spacing and fastening. Seams get taped with quality drywall taping compound, then multiple finish coats are applied and sanded smooth. Each layer matters—this is where cheap work shows up later.
Finally, we clean up and walk you through the finished work. You get walls that are paint-ready or ready for whatever finish you’re planning. The job site gets left clean, and you’re not stuck dealing with drywall dust for weeks after we leave.
Ready to get started?
You’re getting full-service drywall installation—hanging, taping, mudding, and finishing to a smooth, paint-ready surface. We handle both new construction and renovation work, whether that’s finishing a basement, repairing damaged walls, or handling a full interior remodel.
For Selden homeowners, that often means working with older homes where walls have settled or been damaged over time. We’re equipped to handle drywall repair for everything from small holes to water-damaged sections that need replacement. The goal is always a seamless finish that blends with existing walls.
Commercial drywall installation is also part of what we do. Office build-outs, retail spaces, and other commercial projects in Suffolk County get the same attention to detail. We understand the timelines and standards that commercial work requires.
Pricing in the Long Island area typically runs $80-90 per board for professional installation. A standard 2,000 square foot home uses roughly 200 boards, putting most full-home projects in the $16,000-$18,000 range. Your actual cost depends on the scope, ceiling height, and finish level you need—but you’ll get that number upfront, in writing.
A single room usually takes two to four days depending on size and finish requirements. Day one is hanging the boards. Day two is taping and the first coat of mud. Days three and four are finish coats, sanding, and final touch-ups.
Larger projects or whole-home installations take longer—usually one to two weeks for a full house. That timeline accounts for proper drying time between coats, which you can’t rush without compromising quality.
If you’re working with an older Selden home that needs wall repairs before new sheetrock goes up, add time for that prep work. We’ll give you a realistic timeline during the estimate so you can plan accordingly.
Repair works when the damage is localized—small holes, cracks, or isolated water damage. We cut out the damaged section, patch it with new drywall, tape and mud the seams, then finish it to match the surrounding wall. This is usually faster and less expensive.
Full replacement makes sense when walls are extensively damaged, outdated, or you’re doing a complete renovation. If you’re dealing with multiple problem areas, sagging ceilings, or walls that have been patched repeatedly, replacement often costs less in the long run than trying to repair everything piecemeal.
We’ll assess your specific situation and recommend the approach that makes the most sense. Sometimes a repair is perfectly adequate. Other times, replacement is the smarter investment. You’ll get an honest assessment either way.
Yes. Residential work includes everything from single-room repairs to full-home renovations, basement finishing, and additions. Most of our Selden residential clients are updating older homes or finishing previously unfinished spaces.
Commercial projects cover office build-outs, retail spaces, and other commercial properties throughout Suffolk County. The process is similar, but commercial work often has tighter timelines and specific code requirements we’re fully equipped to meet.
Both types of projects get the same quality standards and transparent pricing. The main difference is scheduling—commercial jobs often need to happen outside business hours or on weekends to minimize disruption. We can accommodate that when needed.
Most drywall issues come from house settling, temperature changes, or moisture. Homes naturally shift over time, especially in the first few years after construction. That movement creates stress on drywall seams and fasteners, leading to cracks or nails that pop through the surface.
Moisture is another common culprit. Leaks, high humidity, or poor ventilation can cause drywall to sag, crumble, or develop mold. In Selden’s climate, basements and bathrooms are particularly vulnerable if they weren’t properly moisture-protected during installation.
Poor installation also causes problems. If boards weren’t hung correctly, seams weren’t taped properly, or the wrong type of drywall was used for the space, you’ll see issues sooner rather than later. That’s why the quality of the initial installation matters so much.
Professional installation typically runs $80-90 per board in the Long Island area. That includes hanging, taping, mudding, and finishing to a smooth, paint-ready surface. A standard bedroom might use 40-50 boards. A full home averages around 200 boards.
Your actual cost depends on several factors: ceiling height, number of corners and angles, desired finish level, and whether we’re working with new construction or renovation. Repairs cost less than full installation but vary based on damage extent.
We provide written estimates before starting any work. You’ll know exactly what you’re paying and what’s included. No surprise charges, no pressure to add services you don’t need. Just clear numbers based on the actual scope of your project.
Start with licensing and insurance. Any contractor working on your Selden home should be properly licensed for Suffolk County and carry both liability and workers’ comp insurance. That protects you if something goes wrong.
Look for transparent pricing and clear communication. You should get a detailed written estimate that breaks down costs, not a vague ballpark number that changes later. And you should be able to reach your contractor when you have questions—not get stuck in voicemail jail.
Check how long they’ve been in business and whether they use their own crews or subcontractors. Direct employees mean better quality control and accountability. Ask about their process, timeline, and what happens if issues come up mid-project. The answers tell you a lot about how they actually operate.
Local Resources
Useful Links
